general characteristics
Variable angle gliding V-bottom with longitudinal support pads and wave trap; hull and deck made of reinforced fibreglass; bow fishing gangway, hull and deck painted in white isophtalic gel coat; bow thruster, adhesive floating band, Gagliotta logo, cushioning, internal covering in fabric and walnut panels finished with satin paint; marine plywood furniture and inside doors with a walnut covering and a satin painted surface; internal upholstery made with fabrics chosen from the shipyard pattern book; light alloy and stainless steel ironmongery; stainless steel portholes; light alloy manholes; stainless steel, copper and RINA-approved rubber pipelines; sea cocks, valves and outlets.

deck
Chain locker with a deposit for seafaring fitting-out; peak for seafaring fitting-out; 10 kg and 50 m bright steel “Bruce”-type anchor, 8 mm zinced chain; AISI 316 bright steel stem head; 1000 W electric anchor winch controlled from the dashboard and with a protection magnothermic switch; push-button panel to control the winch from the bow; pull-out bow shower attachment; AISI 316 stainless steel rail; AISI 316 stainless steel fender holders; four stainless steel bitts; two stainless steel bow fairleads; running and anchorage lights set; sound signalling apparatus; two manholes; Roll Bar with lights and Hi-Fi speakers; bimini top with steel supporting arches; stainless steel shaped windshield with plexiglass plates; aluminium and rubber fender bar; air intake of the engine; drain wire socket; built-in bow sundeck; anti-slip surface; stainless steel plugs for fuel and water loading; air intakes of the engine.

external anchorage
Self-emptying cockpit; L-shaped sofa for six persons; small sofa for two persons with a folding table; driver’s double seat and housing compartment for the self-inflatable raft; stowage peaks for seafaring equipments on the transom and on the bulwarks; access door to the cockpit with a bright stainless steel closure shackle; iroko covered stern gangplank and folding ladder; battery cut-off switch compartment; hot and cool water external shower; cabin access door having a lock.

external kitchenette
Fibreglass kitchen piece of furniture; glass-ceramic cooktop, sink; cockpit refrigerator.

interiors
Entrance staircase with wooden steps; barometric station; facing sofas and a central table convertible in a bed; drawers below; right side piece of furniture; portholes and wall cabinets on both the two sides with satin painted closing doors made in Daniela walnut wood; cd and Hi-fi; halogen spotlights with steel ring nuts; electrical board in a wall cabinet; wooden and fabric finished panels; darkening curtains and internal upholsteries made with fabrics chosen from the shipyard pattern book; lights switches; 220V sockets; microwave oven; 17” LCD tv.

guests’ cabin
Walnut access door; large single bed; wardrobe; mattress; bed covers and cushions covers made with fabrics chosen from the shipyard pattern book; 1 porthole; lighting halogen spotlights with steel ring nuts; 220V sockets.

master’s cabin
Walnut access door; double bed with large peaks below; bed covers and cushions covers made with fabrics chosen from the shipyard pattern book; 2 portholes; 1 manhole and object-holding compartments with closing doors made in Daniela wooden walnut; lighting halogen spotlights with steel ring nuts; drawer with a wooden door; manhole; 220V sockets.

bathroom
Wooden access door; electrical wc; cabinet with a built-in washbasin and a pull-out shower; mirror; wooden grating floor; lighting halogen spotlights with steel ring nuts; small tank to collect the shower water; porthole on the bulwarks; 220V sockets.

engines and technical compartment
Access to the engines compartment through an hatch; thermoacustical isolation of the engine compartment; two inboard-outboard Mercruiser D-Tronic 270 HP with a steel double screw; overhead light; two additional fuel prefilters with water separators (RACOR); diesel oil sight level; bilges treated with gel coat; two bilge pumps; fuel system with a remote closing control; trimming tabs; battery charger rectifier; battery rack compartment; two lt 630 fuel tanks; boiler; autoclave; lt 190 water tank; power unit.

dashboard
Navigational compass for high speed; keys to start and stop engines; two engine speed indicators; steering angle; gps plotter with an echo-sounding gear; VHF; two engine temperature indicators; two indicators for the engine oil pressure; two voltmeters to recharge the engines alternators; power trim position indicators for engines with a stern unit; fuel and water level indicators, wooden and steel steering wheel; engines double-lever control; control switches for the services; trimming tabs controls and indicators; bow screw control.

electric system
One 12V 200Ah battery to start up the winch and to make it run; one 12V 200Ah battery for services; 50Ah battery for power unit; two mechanical battery cut-off switch for services and starting up; parallel controlled from the dashboard, 220V 60Ah automatic electronic rectifier, internal board with control instruments to recharge the rectifier; voltmeter for the 220V ground voltage control/power unit; amperometer to control the supplied power; 220V ground or power unit commutator; 12V and 220V magnetothermic switches on all the services; power unit control board.